If this is disabled, the thermal stop does not take place even if this parameter is active in the
currently running cycle.
When the THERMAL STOP is activated (Thermal Stop YES) the phase time does not start to run
until the programmed temperature is reached in order to ensure a correct wash.
If this is disconnected, the time will start to run from the moment the programmed level is reached.
Press to return to the initial screen.
2.7 HUD
Press the key in the self-service configuration menu to go to the screen that allows the
parameters of the standby screens, the main screen and the run screen to be configured.
Press to return to the initial configuration screen.
2.7.1 Promotional video
Pressing the option to activate a promotional video is accessed on the computer screen.
As with the logo, the button can only be pressed once a video has been imported.
To Next Page
Loading...
Need help?
General
