04-3
4.4 Rims
Only use rims that are covered by the vehicle
licence. Should you wish to use other rims,
please note the following:
Rules for the use of other rims:
- Size,
- mechanisms,
- compression depth and
- the load/bearing capacity must be sufcient
for the permissible total mass.
- The chuck cone of the fastening screw must
correspond to the rim mechanisms.
Modications can only be made with
the manufacturer's permission.
Rules for wheel screws
- wheel bolts must rst be checked after a
distance of 50 km and then checked during
regular maintenance.
Adjusting torque
- for steel rims: 105 Nm
- for aluminium rims: 120 Nm
WARNING: When changing rims
(steel -> aluminium / aluminium ->
steel) ensure that you are using the
correct wheel screws.
To Next Page
Loading...
Need help?
General