er [1-7] or wind it up on the cord holder. To
do so, lay the power cable through the re
cess [4-3].
► Vacuum and wipe the inside and outside of
the mobile dust extractor to clean it.
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
The lid of the hose holder also serves
as a storage area for tools.
9 Service and maintenance
WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main
tenance work.
► All maintenance and repair work which re
quires the motor housing to be opened
should always be carried out by an author
ised service workshop.
Customer service and repairs must only be
carried out by the manufacturer or service
workshops: Find the nearest address at:
www.festool.com/service
Always use original Festool spare parts. Order
no. at: www.festool.com/service
► Regularly clean the fill level sensors [4-4]
and empty the dirt trap .
Observe the following information:
– Dust-related inspection (e.g. for filter dam
age, tightness of the machine and function
of the control devices) by the manufacturer
or an instructed person at least once a
year.
– Dispose of components that cannot be
cleaned. Use impermeable bags to do so.
Observe the applicable disposal provisions!
10 Environment
Do not dispose of the device in the
household waste! Recycle devices, ac
cessories and packaging. Observe appli
cable national regulations.
EU only: In accordance with European Directive
on waste electrical and electronic equipment
and implementation in national law, used power
tools must be collected separately and handed
in for environmentally friendly recycling.
Information on REACH: www.festool.com/reach
The Bluetooth
®
word mark and the logos are
registered trademarks of Bluetooth SIG, Inc.;
they are used by TTS Tooltechnic Systems AG &
Co. KG, and therefore by Festool, under licence.
English
18
To Previous Page
Loading...
Need help?
General
