10
3. Use a pin to press the pairing button inside the tin hole on the receiver.
4. The blue light on the receiver will stop blinking for approximately 1 second. At this
time, press the power button on the microphone for twice in a row quickly.
5. A few seconds later, the flashing light on receiver and microphone will stay on and
the receiver pairs with the microphone successful.
Charge
1. The microphone has built-in battery. Indicator light will turn green when it’s fully
charged. It can last for 5-6 hours after charging 2 hours.
2. The receiver doesn’t have built-in battery. It relies on the phone/tablet for power.
You could also use the Type-C port to charge your phone while using the mic to
avoid low battery. (Note: iPhone/iPad and some of the Android phones does not
support this function.)
Tips: After the receiver disconnecting from the device for 5 minutes, the mic will shut
down by itself to save power.
Press here for twice in a row
quickly.
To Next Page
Loading...
Need help?
General
