www.CNfpv.com
power consumption will be saved.
Image Rotate: On/Off, image will rate 180 degrees
（
Only available on some
resolutions
）
.
Distortion Correction: On/Off, image distortion will be corrected.
（
Only available on
some resolutions
）
.(Note: Only turn it on for 170 degrees version)
Auto shutdown: Off, 2Min,3Min,5Min,10Min. When there’s no operations, the
machine will auto shutdown.
Screen Off: Off,30S,1Min,3Min,5Min. When there’s no operations,will power off the
screen.
Status LED: Off, 1,2,3. Set the action LED light on the machine.
Beep: Off,On. Turn ON/OFF beep voice on the machine.
Time Setup:Set the date time of the machine, or you could update date time with
the APP thought WiFi.
Date Format:Y/M/D,D/M/Y,M/D/Y.
Language: English, Chinese,Russian.
BT Pair.
How to pair BT remote controller: Set this menu ON, the machine will keep
searching BT remote controller. Press any key of the remote controller, and the
controller’s light will turn on. Keep pressing any key of the remote controller
until searching function finished and they will paired. Note: When Camera
power ON , it will keep searching BT remote controller for 20 seconds(If BT auto
start is turned ON), if you keep pressing controller’s key (about 5 times), they
will be pared automaticly. Bluetooth remote controller is not in stander
package.
Bluetooth auto-start: ON/OFF. When turn off, boot up will be faster. Its suggested to
turn it off to make boot up faster.
WiFi: ON,OFF. Turn Wifi ON/OFF, or you press and hold “Down key” for 2 seconds.
To Next Page
Loading...
Need help?
General
