31
Using your ice maker (Ice & Water models)
Ice On/Off
Your automatic ice maker is designed to dispense ice cubes into
the ice storage bin below until it senses the bin is full. If you
require more ice, the storage bin can be removed and ice will
dispense into the top freezer bin.
Before you start using you automatic ice maker
When you first turn your refrigerator on after installation, the
icemaker will be off.
To turn your ice maker on press the button. The light above
the ICE ON/OFF icon will be illuminated when the ice maker is on.
Press and hold , and buttons together for 4 seconds
then close the door(s). The ice tray will flip twice and empty the
water into the bin below. The ice tray will flip only after the doors
are closed.
Force another cycle, this step helps remove any manufacturing
and transportation dust in the ice tray.
Empty the water and correctly replace the bin, ensuring the scoop
is located at the front of the bin.
If the bin is full of ice, inserted incorrectly or if all bins are
removed, the ice maker will not operate. When the bin is inserted
correctly the scoop will be on the right hand side of the bin or at
the front of the bin.
Once your ice maker is in operation, discard the first 3 harvests
of ice (8 ice cubes are produced per harvest). This will flush away
any impurities in the water line and ensure that you get the best
quality ice. We recommend that you also do this after vacations or
extended periods of not using ice.
We recommend that you turn the ice maker off if:
– The water supply is to be off for several hours, or
– The ice storage bin is to be removed for a period of time, or
– You are going on holiday/vacation.
Ice storage bin and
scoop in correct position
E402B, E442B, E522B,
RF402B, RF442B, RF522A,
RF522W and RF522B
RF610A/RF540A
Turning ice maker on
To Next Page
Loading...
Need help?
General
