40
Cleaning care
To remove produce bins or upper freezer bins
To remove bins, roll out the tray and then use two
hands when picking up a bin. Picking up a bin
one-handed may cause it to crack or break.
Remove the bins, wash and replace back onto trays.
To remove trays
For ease of removal, empty food from tray/remove the bins from the tray first.
Hold the centre front of the tray handle.
Lift vertically to unclip from the runners and pull tray towards you to remove.
Push both runners back into refrigerator.
To replace trays
With the runners pushed back into the refrigerator, place the tray on top of the runners.
Push the tray back slowly until you feel it clip back onto the runners.
Important!
Ensure that trays are securely clipped onto the runners before use.
Tray runners are pre-lubricated, and will not need to be re-lubricated during their life. Do not
attempt to clean grease from the runners, as this will affect their ability to function. Do not
immerse runners in water.
Permanently fixed bins and trays (Freezer drawer models only)
The freezer bins and trays in this model are permanently fixed. They cannot be removed
from the freezer compartment. To clean simply wipe with a soft, damp cloth.
Ice storage bin
All models
When going on vacation/holiday we recommend cleaning your ice bin and discarding any
old ice in the bottom of the bin(s) before leaving.
When cleaning use only liquid dishwashing detergent dissolved in warm water and a soft
lint-free cloth. Rinse with clean water and dry with a clean, lint-free cloth.
When replacing the bin ensure that the ice scoop is positioned at the front.
Tray removal
To Next Page
Loading...
Need help?
General
