EasyManuals Logo
Home>Fisher & Paykel>Dishwasher>DW60UC2X

Fisher & Paykel DW60UC2X User Manual

Fisher & Paykel DW60UC2X
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
17
Rinse aid indicator
(on control panel)
AFTER THE WASH
When the wash programme is over, the dishwasher will beep six times, then
automatically turn off in a few seconds.
1 Open the door slightly and leave it ajar (about 100mm) to help the drying process.
2 Once the dishes are cool to touch, they can be removed.
IMPORTANT!
Never leave the dishwasher door in the fully open position, as this could present a
tripping hazard.
3 Check that the detergent dispenser is completely empty. If it isn’t, wipe out with a
damp cloth.
4 Inspect your dishwasher regularly to see if it needs any cleaning or maintenance:
Check that no grease or limescale deposits have accumulated on the inside.
If there are food particles in the filters, these need to be cleaned as well.
See section ‘Care and cleaning’ for cleaning and maintenance instructions.
Holiday time
If the dishwasher is not going to be used for some time:
Ensure the baskets are empty.
Leave the inside of the dishwasher clean.
Leave the dishwasher door ajar to allow air to circulate.
Turn off both the power and water supply to the dishwasher.

Other manuals for Fisher & Paykel DW60UC2X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fisher & Paykel DW60UC2X and is the answer not in the manual?

Fisher & Paykel DW60UC2X Specifications

General IconGeneral
BrandFisher & Paykel
ModelDW60UC2X
CategoryDishwasher
LanguageEnglish

Related product manuals