Fisher FIELDVUE DVC6200 Quick Start Guide

www.Fisher.com
Fisher
™
FIELDVUE
™
DVC6200 Series Digital Valve
Controllers
Contents
Before You Begin 3......................................
Step 1. Install the DVC6200 on the Valve 4...................
Step 2. Connect the Pneumatic Tubing 19...................
Step 3. Connect the Electrical Wires 23......................
Step 4. Configure the DVC6200 33.........................
Special Instructions for DVC6200 SIS 35.....................
Special Instructions for DVC6200f PST 37....................
Special Instructions for Solenoid Valve Health Monitoring 43....
Quick Start Guide
D103556X012
DVC6200 Digital Valve Controllers
January 2017
This quick start guide provides installation and initial setup information for DVC6200 Series digital valve controllers
W9713
SIS

Fisher FIELDVUE DVC6200 Specifications

General

Type	Digital Valve Controller
Operating Temperature Range	-40 to 85 °C (-40 to 185 °F)
Enclosure Rating	NEMA 4X, IP66
Input Signal	4-20 mA, HART
Communication Protocol	HART
Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Diagnostics	Valve signature
Approvals	ATEX, IECEx, FM, CSA
Power Supply	Loop powered