2
Setting up your Fitbit Aria
Two methods are available for setting up your Aria scale:
• Use our downloadable software client on a Wi-Fi enabled computer. We
recommend trying this method first.
• Use our web-based setup tool on either a Wi-Fi enabled computer or a mobile
device such as a smartphone. We recommend trying this method if the client
method doesn’t work.
Setting up your scale with the software client
Fitbit Wi-Fi Scale Setup is the software application that connects your Aria scale to
your Fitbit.com dashboard. It is available to download at no cost from Fitbit.com.
Follow the instructions below for your Mac or Windows computer after verifying that
your computer and home network meet installation requirements.
Mac OS & Windows requirements
Networking requirements
The Fitbit Aria connects directly to your home’s wireless network and supports the
following network configurations:
• Wireless 802.11b standard
• WEP / WPA / WPA2 personal security
• Automatic (DHCP) IP setup (static IP configuration not supported)
Aria requires an 802.11b-compatible network to connect and sync your scale data to
your Fitbit dashboard. If your computer is not equipped with an 802.11b-compatible
network card, skip this setup method and go to “Setting up your Aria with the web-
based setup tool” on page 4.
Installing the software client on a Mac
1. Make sure you have the following information about your wireless network:
• Wireless network name (SSID)
• WEP / WPA / WPA2 Password (if applicable)
If you don’t have this information, contact the wireless router manufacturer
To Next Page
Loading...
Need help?
General
