EasyManuals Logo
Home>FLIR>Thermal cameras>Scout II Series

FLIR Scout II Series User Manual

FLIR Scout II Series
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
431-0008-21-10 Rev. 100 March 2015 7
2 Getting Started
2–1 Charging the Camera
Caution!
The camera battery should be fully charged prior to use.
To charge the camera, lift the cover from the USB port,
plug in the USB cable provided with the camera, and plug
other cable end into a USB power source.
When charging correctly, the char
ging
indicator will be lit orange.
When fully charged, the charging indicator
will light solid green. The initial charge time is
approximately 5 hours.
To assure proper charging, Scout II Series cameras should be turned OFF throughout
the charging cycle. Charging MUST only be done when the camera temperature is from
0 to 40°C (32 to 104°F), or battery damage may occur.
USB port
Plug in USB Charger
Charging indicator green
Charging indicator
when fully charged
orange when charging

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR Scout II Series and is the answer not in the manual?

FLIR Scout II Series Specifications

General IconGeneral
BrandFLIR
ModelScout II Series
CategoryThermal cameras
LanguageEnglish

Related product manuals