Workgroup Analyzer
The Analyzer and Accessories
3
The Analyzer and Accessories
The analyzer is designed for troubleshooting and monitoring Local Area Networks
(LANs). It tests all seven OSI layers from the cable to the application layer and
everything in between, so problems have nowhere to hide. The analyzer can be
used in a stand-alone fashion or mounted in a rack using the optional rackmount
kit. There are three models available:
q OptiView
TM
Workgroup (standard version) - supports 10/100 Ethernet
(10BASE-T and 100BASE-TX) through a RJ-45 jack. Features an additional
10/100 Ethernet RJ-45 jack for out-of-band management, and is
RMON/RMON2 compliant.
q OptiView
TM
Workgroup Pro - adds to the standard version a 100BASE-FX
fiber optic interface, and packet capture.
q OptiView
TM
Workgroup Pro Gigabit - adds to the Pro version a fiber
1000BASE-SX interface using a standard GBIC (a 1000BASE-LX or
1000BASE-TX GBIC may be ordered as an option).
Getting
Started
Guide
CD
OptiView
Workgroup
Analyzer
RS-232 Cable
Patch Cable
Power Cord
anj01f.eps
Figure 1. The Standard OptiView
TM
Workgroup Analyzer and Supplied Accessories
To Next Page
Loading...
Need help?
General
