95
[CF66300(ALL)01/96]
5. Once the transmitter is installed, the
actuation peg on the door in line with your
transmitter button may need to be adjusted
for proper function. This can be done using
the button height adjustment pegs (located
on the compartment door). Add one peg at a
time until pressing the door actuates the
transmitter button (Figure 3).
[CF66400(ALL)01/96]
one third page art:0020877-A
[CF66500(ALL)01/96]
6. By properly adjusting the actuation peg
height, you will be able to actuate your
garage door by pressing the door as shown
(Figure 4).
[CF66600(ALL)01/96]
one third page art:0020878-A
File:05cpcfa.ex
Update:Mon Jun 24 08:10:35 1996
To Next Page
Loading...
Need help?
General
