Ford 2000 User Manual

SECTION G
GENERAL
MAINTENANCE
AND ADJUSTMENTS
LIGHTING
EQUIPMENT
BULB
REPLACEMENT
INTERNAL
HEADLAMPS
(a) SEALED
BEAM TYPE
1
.
Remove the
radiator chaff screen.
2. Ease the
sealed beam
unit from the rubber rim.
3. Detach the connector
socket from the
tear of the sealed
beam unit.
4.
Fit a now
sealed beam unit
to the connector
socket and re-instafl
the
parts using
the reverse of
the removal procedure.
(b) 8ULB TYPE
1.
Remove the radiator
chaff scroen.
2. Detach the bulb
holder retaining
spring and remove
the bulb.
3. Fit
a new bulb and re-install.
NOTE:
On Vineyard
tractors the side-light
bulbs ate
contained within
the headlights.
EXTERNAL HEADLAMP
BULB
1. Loosen the rim
locking screw
and detach the
rim and reflector assembly
from the lamp
body.
2.
Remove the bulb holder from
the reflector
by pushing
the holder inwards
and anti-clockwise.
Remove the bulb from
the holder.
3. Fit a new bulb
in the reflector
making sure that it is
correctly located.
4. Replace
the bulb holder noting
that it will
only locate in one
position in
the
reflector.
5. Refit the assembly
into the lamp
body and secure with
the rim locking
screw.
SIDE/REAR LIGHT
BULB
1. Remove the
lens and rim
assembly and the
bulb.
2. Install a new bulb
and re-install in the
reverse order.
12
li

Ford 2000 Specifications

General

Brand	Ford
Model	2000
Category	Tractor
Language	English