F. MAX A/C: Press the button to maximize cooling. Recirculated air
flows through the instrument panel vents, air conditioning automatically
turns on, and the fan automatically adjusts to the highest speed.
G. Recirculated air: Press the button to switch between outside air and
recirculated air. When you select recirculated air, the air currently in the
passenger compartment recirculates. This may reduce the time needed
to cool the interior (when used with A/C) and may reduce unwanted
odors from entering your vehicle.
Note: Recirculated air may turn off automatically (or be prevented
from turning on) in all airflow modes except MAX A/C to reduce risk
of fogging.
H. DUAL: Press the button to allow the passenger to set their
temperature independent of the driver temperature.
I. Fan speed control: Press + or - to increase or decrease the volume
of air circulated in the vehicle.
J. Driver temperature control: Press + or - to increase or decrease
the air temperature for the driver side of the vehicle. This control also
adjusts the passenger side temperature when not in dual zone mode.
REAR PASSENGER CLIMATE CONTROL
A. Fan Speed: Turn to increase or decrease the fan speed. Select O to
switch the rear climate system fan off.
B. Overhead: Distributes air through the overhead vents.
C. Overhead/Floor: Distributes air through the overhead vents and floor
vents.
D. Floor: Distributes air through the floor vents.
E. Temperature control: Controls the temperature of the air circulated
in the rear of the vehicle. Turn to select the desired temperature.
A B C D E
FH G
Climate Control 143
2015 Flex (471)
Owners Guide gf, 1st Printing, October 2014
USA (fus)
To Next Page
Loading...
Need help?
General
