Ford Mustang 2001 User Manual

Item Ford part name Ford part
number
Ford
specification
Automatic
transmission fluid
Motorcraft
MERCONtVATF
2
XT-5-QM MERCONtV
3.8L Manual
transmission fluid
Motorcraft
MERCONt ATF
XT-2-QDX MERCONt
4.6L Manual
transmission fluid
Mobil 1
Synthetict ATF
N/A N/A
Disc brake caliper
rails
Silicone Brake
Caliper Grease
and Dielectric
Compound
D7AZ-19A331-A
(Motorcraft
WA-10)
ESE-M1C171-A
Windshield
washer fluid
Ultra-clear
Windshield
Washer
Concentrate
C9AZ-19550-AC ESR-M17P5-A
1
Add 118 ml (4 oz.) of Additive Friction Modifier
C8AZ-19B546-A or equivalent meeting Ford specification
EST-M2C118-A for complete refill of Traction-Lok axles.
Ford design rear axles contain a synthetic lubricant that
does not require changing unless the axle has been
submerged in water.
2
Ensure the correct automatic transmission fluid is used.
Transmission fluid requirements are indicated on the
dipstick or on the dipstick handle. MERCONt and
MERCONt V are not interchangeable. DO NOT mix
MERCONt and MERCONt V. Refer to your scheduled
maintenance guide to determine the correct service
interval.
ENGINE DATA
Engine 3.8L OHV V6 engine 4.6L SOHC V8 engine
Cubic inches 232 281
Required fuel 87 octane 87 octane
Firing order 1-4-2-5-3-6 1-3-7-2-6-5-4-8
Spark plug gap 1.3-1.4 mm
(0.052-00.056 inch)
1.3-1.4 mm
(0.052-00.056 inch)
Ignition system EDIS Coil on plug
Compression ratio 9.4:1 9.4:1
Capacities and specifications
209

Ford Mustang 2001 Specifications

General

Brand	Ford
Model	Mustang 2001
Category	Automobile
Language	English