Ford VCM3 User Manual

1 699 200 890 2020-03-06
|
Ford Motor Company
8 | VCM3 | Product descriptionen
4.7 VCI Manager program
The "VCI Manager" program is a host computer
application which runs on the Windows
operating system to configure and update
VCM3. The software "VCI Manager" allows
the configuration of VCI-to-host computer
communications and facilitates VCI firmware
updates.
4.8 System requirements
The VCM3 is set up and updated via the
"VCIManager"software.VCIManager
is installed on a computer. The VCM3 is
controlled in the corresponding user software.
i Go to PTS website for minimum PC
requirements.
4.6.2 Power Supply
The VCM3 is designed for voltage to be
supplied from the vehicle via the diagnostic
connection cable. For data transfer or a system
update, the VCM3 can also be supplied with
voltage from the USB port on a computer.
i If the VCM3 is to be configured for a wireless
connection, the voltage must be supplied via
the diagnostic connection cable.
4.6.3 LED status display
Four light emitting diodes (LEDs) are located
on the front of the VCM3. The LED indicators
provide the following status information.
Icon Color
Status
LED Function
green VCM3 without errors
red
Error occurred, perform a
reset
green
VCM3 connected to vehicle
Flashing
red
Not connected to external 12
or24Vpower
off VCM3 without errors
red
Error occurred or VCM3 in
recovery state
off
VCM3 not connected to a
computer
Flashing
green
VCM3 connected to computer
off
VCM3 off
green
VCM3 on
yellow/
green
depending on user software
yellow/
green
depending on user software

Ford VCM3 Specifications

General

Brand	Ford
Model	VCM3
Category	Automobile Accessories
Language	English