21
[SR09530(BEF )05/95]
4. When completed, the safety belt should look
like Figure 3.
[SR09535(BEF )05/95]
half page art:0060600-D
%
*
[SR09600(BEF )05/95]
Safety Belt Extension Assembly
*
[SR09700(BEF )05/95]
For some people, the safety belt may be too
short even when it is fully extended. You can
add about eight inches (20 cm) to the belt length
with a safety belt extension assembly (part
number 611C22). Safety belt extensions are
available at no cost from your dealer.
*
[SR09750(BEF )05/95]
Use only extensions manufactured by the same
supplier as the safety belt. Manufacturer
identification is located at the end of the webbing
on the label. Also, use the safety belt extension
only if the safety belt is too short for you when
fully extended. Do not use extension to change the
fit of the shoulder belt across the torso.
File:ltsrf.ex
Update:Thu May 9 15:26:26 1996
To Next Page
Loading...
Need help?
General
