Frigidaire EFIC239 User Manual

11TROUBLESHOOTING GUIDE
Water leakage
The drain plug is not in place.
The seal has reached the end of its
service life.
Pipe joints in the appliance may
loose.
Put the drain plug in place.
Verify by a qualified
technician.
Verify by a qualified
technician.
The ambient temperature or
thewater temperature in the
inner tankis too high.
Refrigerant liquid leakage.
Refrigeration system malfunctions.
Cover motor is broken
The pipe in the cooling system is
blocked.
Please run the ice maker when
the ambient temperature is
below 90 °F and pour colder
water into the tank.
PROBLEM POSSIBLE CAUSES SOLUTION
“ ” is lightening
on and the arrow
flashes.
Lack of Water.
E1
Making Ice too
slowly
Stop the ice maker, fill
water, and press “ICE/
CLEAN” button again
to restart the unit.
Remove the probable
obstacle inside or clean
the inside wall of the ice
storage.
Press the ICE button twice,
restart ice making program,
if this problem show up
again, verify by a qualified
technician.
Hot Air outlet must be
guaranteed to have more
than 15 CM of ventilation.
Press “ICE/CLEAN” button
for 5 seconds ， it will
work for 80 minutes.
Remove some ice cubes.
Verify by a qualified
technician.
Water temperature
requirement between
44.6°F -89.6°F.
There are too much ice cubes.
(If, no ice cube inside).
Hot Air outlet has been blocked
by something.
The water temperature in inner
tank is too high.
“ ” symbol is
lightening and
letter “F” flashes.

Frigidaire EFIC239 Specifications

General

Type	Countertop Ice Maker
Ice Production	26 lbs per day
Ice Storage Capacity	1.5 lbs
Ice Shape	Bullet
Ice Cube Size	Small, Medium, Large
Water Supply	Manual Fill
Color	Stainless Steel
Power Source	Electric
Voltage	120V
Wattage	120W

Summary

Introduction

Important Safety Information

Safety Definitions

Explains the meaning of safety alert symbols like DANGER, WARNING, and CAUTION.

Child Safety

Provides guidance on safe handling of packaging materials to prevent suffocation risks for children.

Safety Instructions

Getting to Know Your Unit

Operating Procedures & Maintenance

Unpacking Your Ice Maker

Instructions for removing packaging, checking accessories, and initial cleaning of the ice maker.

Connecting Your Ice Maker

Details on properly grounding the appliance and connecting it to a suitable power outlet.

Cleaning and Maintaining Your Ice Maker

Steps for thoroughly cleaning the interior and exterior of the ice maker before and during use.

Using Your Ice Maker

How to Start the Unit

Steps to prepare and start the ice maker, including adding water and plugging it in.

Operation and Display Areas

Explains the control panel functions, including power, ice making, and cleaning modes.

Clean

Recommended cleaning procedure for the ice maker to ensure hygiene and proper function.

How to Obtain the Ice Cube

Instructions on how to operate the ice maker to produce ice cubes.

How to Set the Timer

Guide on using the timer function for delayed start or stop operations.

Troubleshooting Guide

Product Specifications

Limited Warranty

1 Year Warranty

Details the warranty period, coverage, and exclusions for the product.