LEDs Status Description
O
Blinking Green (3Hz)
The system is powered o.
Solid Green The switch is operational.
The switch is being initialized with 3Hz blinking.
Continuous blinking indicates errors.
Blinking Green (10Hz) Supports remote on/o to locate the switch.
STATUS
PWR1/PWR2
MGMT
PoE
Solid Yellow
Temperature warning, check the working environment of
the switch immediately.
Solid Red Switch is faulty.
O The power module is not in place or not receiving power.
Solid Green The power module is connected and able to work.
Solid Red
The redundant power is faulty or the AC power cord is not
connected.
O The port is not connected.
Solid Green The port is connected at 1000 Mbps.
Blinking Green The port is receiving or transmitting trac at 1000 Mbps.
Solid Yellow The port is connected at 10/100 Mbps.
Blinking Yellow The port is receiving or transmitting trac at 10/100 Mbps.
Solid Green Indicates the switching state.
Solid Yellow Indicates the PoE state.
RJ45
O The port is not connected.
Solid Green The port is connected at 1000 Mbps.
Blinking Green The port is receiving or transmitting trac at 1000 Mbps.
Solid Yellow The port is connected at 10/100 Mbps.
Blinking Yellow
The port is receiving or transmitting trac at 10/100 Mbps.
To Next Page
Loading...
Need help?
General
