FS S5810 Series User Manual

Installation Requirements
Before you begin the installation, make sure that you have the followings:
Phillips screwdriver.
Standard-sized, 19" wide rack with a minimum of 1U height available.
Category 5e or higher RJ-45 Ethernet cables, ber optical cables and console cable for connecting
network devices.
Site Environment：
Do not operate it in an area that exceeds an ambient temperature of 50°C.
Do not install the equipment in a dusty environment.
The installation site must be free from leaking or dripping water, heavy dew, and humidity.
The installation site must be well ventilated. Ensure that there is adequate airow around the
switch.
The switch should be installed at least 1U (44.45mm) away from devices to its sides.
Be sure that the switch is level and stable to avoid any hazardous conditions.
Ensure rack and working platforms are well earthed.
MINI CONSOLE
STATUSPWR1 PWR2 MGMT
COMBO
21
43
65
87
21
43
65
87
109
1211
1413
1615 17
On=Link Flashing=ACT Green=1000M Yellow=10/100M
MGMT
CONSOLE

FS S5810 Series Specifications

General

Brand	FS
Model	S5810 Series
Category	Switch
Language	English