3 Copy
76
Copy
3
Operations during Copying
This section describes available operations during copying. The following shows the
reference section for each operation.
Stopping the Copy Job................................................................................................................76
Changing the Number of Copies.................................................................................................77
Interrupting the Copy Job ...........................................................................................................78
Stopping the Copy Job
To cancel a copy job in progress, use the following procedure.
1 Press either the <Stop> button on the control
panel or [Delete] on the touch screen.
2 Select [Delete].
îš„If [Delete] does not appear on the screen:
1 Press the <Job Status> button.
<Stop> button
<Job Status> button
To Next Page
Loading...
Need help?
General
