完成！
打开打印机电源
对于无线连接，本步骤可忽略。
安装可选附件
请参阅附件随附的安装说明书。
驱动程序光盘工具包不支持
Windows 98/Me/2000。
z Driver CD Kit
This guide provides the installation instructions for the printer.
Before installation, read the Safety Guide.
Check the Contents
z Printer
z This guide z Safety Guide
z PostScript Driver Library CD
z Power cord z PS End User License Agreement
z PS Driver Contract
Prepare a USB cable (2 m recommended) or a network cable and paper*1
*1 The printer does not support inkjet paper.
Insert the Driver CD Kit
Select the [Start Setup] button, and follow the instructions.
If the above screen does not appear automatically,
double-click eznavi.exe in the SetupVideo folder included on the Driver CD Kit.
Watching the video setup
Using this guide
Remove the packaging tapes
When setting up the printer, load A4 size paper or larger. When loading Legal size or user-specified print media, slide
the extendable part of the tray while pinching the lever.
Load paper in the tray
Pull the tray out of the printer.
Adjust the paper guides, and align the width guides against the edges of the paper.
After confirming that the guides are securely adjusted, insert the tray into the printer.
Connect a USB or Network Cable
USB connection Wired network connection
USB connector
Network connector
Do not select anything in New Hardware Found
Wizard that appears when the printer and your
computer are connected via a USB cable.
Continued overleaf
Complete !
Turn on the printer
For wireless connection, this step is not necessary.
Install optional accessories
Refer to the installation guide provided with your
accessory.
Driver CD Kit does not support
Windows 98/Me/2000.
驱动程序光盘工具包
To Next Page
Need help?
General
