Fujitsu ARXG07KSLAP User Manual

1-8. Wired remote controller (UTY-RLRG)
DIP switch Memory backup setting
¢
Switch location
Front case (back side)
Set the DIP switch to ON
OFF ON
¢
Dip switch setting
 SW1: Memory backup setting
Set to “ON” to use batteries for the memory backup.
When batteries are not used, all of settings stored in memory will be deleted if there is a power
failure.
SW1 Memory backup Factory setting
OFF Disable ♦
ON Enable
1-9. Wired remote controller (UTY-RNRGZ*)
DIP switch Memory backup setting
¢
Switch location
Front case (back side)
Set the DIP switch to ON
OFF ON
ON
¢
Dip switch setting
 SW1: Memory backup setting
Set to “ON” to use batteries for the memory backup.
When batteries are not used, all of settings stored in memory will be deleted if there is a power
failure.
SW1 Memory backup Factory setting
OFF Disable ♦
ON Enable
1-8. Wired remote controller (UTY-RLRG) - (05-50) - 1. Function settings (for indoor unit)
FIELD WORKING FIELD WORKING

Fujitsu ARXG07KSLAP Specifications

General

Brand	Fujitsu
Model	ARXG07KSLAP
Category	Air Conditioner
Language	English