EasyManuals Logo
Home>Fujitsu>Air Conditioner>ARYG24LMLA

Fujitsu ARYG24LMLA User Manual

Fujitsu ARYG24LMLA
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
En-11
TEMPERATURE SET BACK TIMER
Press the SET BACK button to change to the SET BACK con-
rmation display.
The SET BACK operating time and the set temperature will be
displayed.
2
Press the TIMER SET button
for 2 seconds or more.
1
3
Day setting
Operating time setting
Follow the same procedures to set the operating time as those for the weekly timer. The TIMER DELETE button is also used
as described in the procedures for the weekly timer.
4
NOTES
The SET BACK timer only changes the set temperature, it cannot be used to start or stop air conditioner operation.
The SET BACK timer can be set to operate up to 2 times per day but only 1 temperature setting can be used.
The SET BACK timer can be used together with the ON, OFF, and weekly timer functions.
The SET BACK operating time is displayed only in the SET BACK con rmation display. (Refer to step 1 for the SET BACK
con rmation display.)
SET BACK
ex. When setting all days together
Temperature setting
Press the SET TEMP. buttons to set the
temperature. (The temperature setting range
is the same as the range for the operation
mode.)
ex. Operating time 15:00–22:00
5
Repeat steps 3 and 4.
Press the TIMER SET button for
2 seconds or more to complete
the temperature SET BACK timer
settings.
24°C
24°C
28°C
SET BACK temperature
Normal temperature
To start
SET BACK
Press the SET BACK button. The SET BACK con rmation display appears for
5 seconds, and then the timer starts automatically.
ex. Display during SET BACK timer operation
(The operating time will not be displayed.)
To cancel
Press the SET BACK button, and then
press the TIMER DELETE button while
the SET BACK con rmation display is
displayed. Even if the SET BACK button
is pressed again, the SET BACK timer
will be cancelled.
If there is no existing
SET BACK tempera-
ture setting, “- -” will
be displayed for the
temperature.
1
3
2
4
1
2
Temperature SET BACK timer setting
Temperature SET BACK timer operation
ON OFF
Note: In simultaneous multi connection, this function by using the wireless remote controller cannot be used.
9374379569-02_OM.indb Sec1:119374379569-02_OM.indb Sec1:11 2012-3-27 16:49:512012-3-27 16:49:51

Other manuals for Fujitsu ARYG24LMLA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ARYG24LMLA and is the answer not in the manual?

Fujitsu ARYG24LMLA Specifications

General IconGeneral
TypeAir conditioner indoor unit
Multi-split-
Product colorBlack, Stainless steel
Inverter technologyYes
Refrigerating mediumR410A
Air conditioner functionsCooling, Dehumidifying, Heating
Refrigerating medium weight1700 g
Cooling capacity in watts (nominal)- W
AC input voltage230 V
AC input frequency50 Hz
Hourly energy consumption (cooling)- kWh
Design load (heating) (Warmer heating season)- kW
Energy efficiency class (heating) (Average heating season)A+
Outdoor unit noise level- dB
Airflow1100 m³/h
Indoor unit typeCassette
Indoor unit depth700 mm
Indoor unit width1135 mm
Indoor unit noise level (high speed)31 dB

Related product manuals