EasyManuals Logo
Home>Fujitsu>Air Conditioner>AST18AB

Fujitsu AST18AB User Manual

Fujitsu AST18AB
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
14
Operation and Performance
TROUBLESHOOTING
Instructions relating to heating (*) are applicable only to HEAT & COOL MODEL (Reverse Cycle).
Symptom
Doesnt operate at all:
Poor Cooling
(or *Heating)
performance:
The unit operates
differently from the
remote control units
setting:
See Page
8 to 9
5
CHECK ONCE
MORE
Items to check
Has there been a power failure?
Has a fuse blown out, or a circuit breaker been tripped?
Is the timer operating?
Is the air filter dirty?
Are the air conditioners intake filter or outlet port blocked?
Did you adjust the room temperature settings (thermostat) cor-
rectly?
Is there a window or door open?
In the case of Cooling operation, is a window allowing bright sun-
light to enter? (Close the curtains.)
In the case of Cooling operation, are there heating apparatus and
computers inside the room, or are there too many people in the
room?
Are the remote control units batteries dead?
Are the remote control units batteries loaded properly?
If the problem persists after performing these checks, or if you notice burning smells, or the TIMER indicator lamp (Fig.3 6)
flashes, immediately stop operation, disconnect the power supply, and consult authorized service personnel.
OPERATING TIPS
*Heating Performance
This air conditioner operates on the heat-pump principle,
absorbing heat from outdoor air and transferring that heat
indoors. As a result, the operating performance is reduced
as outdoor air temperature drops. If you feel that insuffi-
cient heating performance is being produced, we recom-
mend you use this air conditioner in conjunction with
another kind of heating appliance.
Heat-pump air conditioners heat your entire room by
recirculating air throughout the room, with the result that
some time may be required after first starting the air con-
ditioner until the room is heated.
*Microcomputer-controlled Automatic Defrosting
When using the Heating mode under conditions of low
outdoor air temperature high humidity, frost may form on
the outdoor unit, resulting in reduced operating perform-
ance.
In order to prevent this kind of reduced performance, this
unit is equipped with a Microcomputer-controlled Automatic
Defrosting function. If frost forms, the air conditioner will
temporarily stop, and the defrosting circuit will operate
briefly (for about 7 to 15 minutes).
During Automatic Defrosting operation, the OPERATION
indicator lamp (red) will flash.
*
When Indoor and Outdoor Temperatures are High
When both indoor and outdoor temperatures are high dur-
ing use of the heating mode, the outdoor units fan may stop
at times.
*Low Ambient Cooling
When the outdoor temperature drops, the outdoor units fans
may switch to Low Speed.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu AST18AB and is the answer not in the manual?

Fujitsu AST18AB Specifications

General IconGeneral
BrandFujitsu
ModelAST18AB
CategoryAir Conditioner
LanguageEnglish

Related product manuals