EasyManuals Logo
Home>Fujitsu>Air Conditioner>ASYG07-09-12KPCA

Fujitsu ASYG07-09-12KPCA User Manual

Fujitsu ASYG07-09-12KPCA
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
En-7
Automatic defrosting operation
When outdoor temperature is very low with high humidity, frost may
form on the outdoor unit during the heating operation, and it could
reduce the operating performance of the product.
For frost protection, a microcomputer-controlled automatic defrost
function is equipped in this air conditioner.
If frost forms, the air conditioner will temporarily stop, and defrost circuit
will operate briefl y (maximum of 15 minutes.)
[
] indicator on the indoor unit blinks during this operation.
If frost forms on the outdoor unit after the Heating operation, the outdoor
unit will stop automatically after it operates for a few minutes. Then the
Automatic defrosting operation starts.
Auto-restart function
In event of power interruption such as a blackout, the air conditioner
stops once. But it restarts automatically and performs previous operation
when the power supply is resumed.
If any power interruption occurs after the timer is set, counting down of
the timer will be reset.
After the power supply is resumed, [
] indicator on the indoor unit
blinks to notify you that there has been a timer fault. In such a case,
reset the clock and timer settings.
Malfunctions caused by other electrical
devices
Use of other electrical appliances such as an electric shaver or nearby
use of a wireless radio transmitter may cause the malfunction of the air
conditioner.
If you encounter such a malfunction, turn off the circuit breaker once.
Then turn it on again, and resume operation by using the remote
controller.
Indoor unit temperature and humidity range
Permissible ranges of temperature and humidity are as follows:
Indoor temperature Cooling/Dry [°C] 18 to 32
Heating [°C] 16 to 30
Indoor humidity [%] 80 or less *
1)
*1) If the air conditioner is used continuously for many hours, water may
condense on the surface and drip.
If the unit is operated under the conditions except the permissible
temperature range, the air conditioner operation may stop because
of the automatic protection circuit working.
Depending on the operating conditions, the heat exchanger may
freeze, causing water leakage or other malfunction (in the Cooling
or Dry mode).
Other information
Do not use the air conditioner for any purpose other than room
cooling/dry, room heating or fan.
For the permissible ranges of temperature and humidity for the
outdoor unit, refer to the outdoor unit installation manual.
10. OPTIONAL PARTS
10.1. Wireless LAN control
The optional wireless LAN control can be used.
For how to operate the mobile app, refer to the operating manual of the
mobile app.
Write down the SSID and the PIN code to the following table.
MAC: 
SSID: AP-WF-
PIN: 
Wireless LAN label
Connection
port
Information on W-LAN adapter
SSID
PIN
Google Play is a registered trademark of Google Inc.
App store is a service mark of Apple Inc., registered in the U.S. and
other countries.
Setting to use wireless LAN control
Step 1. Application software installation
1. Open “Google Play” or “App Store” depending on the type
of your smartphone or tablet PC.
2. Search for “FGLair”.
3. Install the application software (mobile app) following the
instructions on your screen.
Step 2. User registration
1. Open the installed mobile app.
2. Register the user (with either a smartphone or tablet PC) by
following the instructions in the create an account section of
the mobile app.
Step 3. Installing W-LAN adapter
CAUTION
Be sure to turn off the power supply of the air
conditioner when installing or removing this product to
avoid the risk of electric shock.
Do not put fi ngers, sticks etc. in the connection part of
this product and the connection slot of the indoor unit.
Otherwise, electric shock or damage to the product
may occur.
Do not standing on an unstable platform when
installing or removing this product to avoid injury.
1. Be sure to turn air conditioner off and to disconnect all the
power supply.
2. Open the intake grille.
3. Open the W-LAN adapter cover until it snaps.
4. Plug the W-LAN adapter into the connection slot of the
indoor unit in the direction as shown in the fi gure.
Label side
5. Close the W-LAN adapter cover and the intake grille.
9333892009_OM.indb 79333892009_OM.indb 7 12/21/2018 2:34:05 PM12/21/2018 2:34:05 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ASYG07-09-12KPCA and is the answer not in the manual?

Fujitsu ASYG07-09-12KPCA Specifications

General IconGeneral
BrandFujitsu
ModelASYG07-09-12KPCA
CategoryAir Conditioner
LanguageEnglish

Related product manuals