Brief description of main bo ard Engl
ish - 3
Brief description of mainboar
d
Information about boards
Be sure to observe the following for boards with E SD :
• You must always discharge static build up (e.g. by touching a grounded object)
before working w ith the b oard.
• The equipment and t ools you use must be free of s tatic charge.
• Remove the power plug from the mains supply before inserting or removing
boards.
• Always hold boards by their edges.
• Never touch connector pins or condu ctors on the board.
An overview of the features is provided in the data sheet.
Special features
Your mainboard is available in different configuration levels. Depending on the configuration,
your mainboard will be equipped with or provide support for certain features.
This manual describes the most important properties of this mainboard.
Additional information on mainboards is provided in the manual "Basic information on mainboard"
on the "User Documentation" or "OEM Mainboard" CD, or on th e Internet.
Fujitsu Technology Solutions 13
To Next Page
Loading...
Need help?
General
