Installing/removing th e pro cesso r
English - 5
Installing/removing the proc
essor
Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system .
Technical data
• Socket LGA 1150, max. 95
W
• A current list of the processors supported b y this main board is available o n the
Internet at: "
http://www.fujitsu.com/fts/product s".
Never touch the underside of the processor. Even minor soiling su ch as grease
from the skin c an impair the processor’s operation or destroy the pro cessor.
Place the processor in the socket with extrem e care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent do not insert the processor in any case as
it may be damaged by doing so. Please contact the responsible dealer.
Fujitsu 19
To Next Page
Loading...
Need help?
General
