Fujitsu D3231 User Manual

Installing/removin g m ain memory En
glish - 7
Installing/removing main mem
ory
Tech nic al data
Technology
DDR3 1333/1600 MHz unbuffered DIMM modules 240 pin; 1.5 V;
64 bit, no ECC
Total size
1to32GByteDDR3
Module size
1, 2, 4 or 8 GByte per module
A current list of the memory modules recommended fo r this mainboard is available
on the Internet at: "
http://www.fujitsu.com/fts/product s".
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
Only unbuffered DDR3 memory modules without ECC may be used.
DDR3 memory m odules must comply with the PC3-10600 or PC3-12800 speci fication.
If you use more than one memory module, then make sure to distribute the
memory modules over both memory cha nnels. By doing this you use the
performance advantages of the dual-channel mode.
Maximum system performance is achieved when identical memory modules
are used in Channel A and Channel B.
To simplify equipping, the slots are colour coded.
Depending on how th e syste m is configured, the visible main memory can be redu ced.
Channel B, Slot 2
Channel B, Slot 4
Channel A, Slot 1
Channel A, Slot 3
Number of m
emory modules inserted
Slot to be used 1 2 3 4
Channel A, slot 1
xxxx
Channel
B, slot 2
xxx
Channel A, slot 3
xx
Channel B, Slot 4
x
The i
nstallation/removal is described in the "Basic information on mainboard" manual.
Fujitsu 21

Fujitsu D3231 Specifications

General

Brand	Fujitsu
Model	D3231
Category	Motherboard
Language	English