fi-5120C / fi-5220C Image Scanner Operator
Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
6.2 Error Indications in the Operator Panel (1)
1
2
When any error occurrs, the operator panel indicates "U" followed by a number for temporary errors or "E" followed by
a number for device alarms (permanent error). Temporary errors can be resolved by the operator, but the device
alarm requires recovery works by support engineers.
When the Error Recovery Guide is installed on your PC, its window appears when Windows is started up. If any error or
device alarm occurred, this software displays information such as error names and error codes regarding the error/
alarm. Record the information and click [Details] on its window to learn detailed information for trouble shooting.
Temporary Errors :
Indication Meaning Remedy
U0 Shipping lock error(fi-5220C only)
Confirm that the shipping lock is released. For
details refer toA[fi-5120C/fi-5220C Getting Start
section 2.1 Installing the Scanner].
U1 Paper Feed Error
Remove the jammed documents. Refer to "
6.1
Removing JammedDocuments".
Confirm that the documents meet the paper
conditions for scanning. Refer to "
7.2
Document Quality".
U2 Multi Feed Error
U4
The ADF has been opened during
scanning.
Close the ADF cover completely. For the
details, refer to "
6 TROUBLESHOOTING".
U6 The print cartridge is not set.(fi-5120C only)
This is a temporary error related withthe
Imprinter option (sold separately). For details
refer to 553PR Operator's Guide, chapter "5
Error Message".
HINT
The Error Recover Guide is stored in Setup CD-ROM. When installing the application
software, refer to "2.1 Installing the Scanner Application" in fi-5120C/fi-5220C Getting
Started.
1
2
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
To Next Page
Loading...
Need help?
General