fi-5120C / fi-5220C Image Scanner Operator
Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
2.5 How to Use the Scanner Driver (5)
1 2 3 4
5
6 7 8 9 10 11 12 13 14 15
Image Mode
Specifies the image type for the scanned documents
Black & White Documents are scanned in binary (black and white).
Halftone Documents are scanned through halftone processing in black and white.
Grayscale Documents are scanned in gradations from black to white. For this mode you can select
256 gradations or 4 bit (16 gardations).
Color
Documents are scanned in color. For this mode, you can select 24 bit Color, 256 Color or
8 Color.
[Scan] button
Starts scanning documents with the current settings.
[Preview] button
Documents are scanned preliminarily before the actual scanning.
You can confirm the image of the documents in the preview window.
[Close] button
Saves the current settings and closes this window.
[Reset] button
Used to undo changes of settings.
[Help] button
Opens the "FUJITSU TWAIN32 Scanner Driver Help" window. The window also opens by pushing the [F1] key.
[About...] button
Opens an information window about the FUJITSU TWAIN32 Scanner Driver's version.
1 2 3 4
5
6 7 8 9 10 11 12 13 14 15
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
To Next Page
Loading...
Need help?
General