Fujitsu LifeBook P772 Bios Guide

34
LIFEBOOK E/P/S/U BIOS Guide
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through
the Setup Utility on page 2 for more information.)
The following table shows the names of the menu
fields for the Exit menu, the default settings and a
description of the field's function and any special
information needed to help understand the field's use.
Figure 19. Exit Menu
Table 19: Fields, Options and Defaults for the Exit Menu
Menu Field Model Description
Exit Saving
Changes
All Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the
BIOS memory, then exit the utility. A confirmation message Save Configuration
changes and exit now? [Yes][No] is displayed.
Exit Discard-
ing Changes
Selecting Exit Discarding Changes and Exit will exit the setup utility without writing to the BIOS
memory. When the BIOS recognizes this selection it will reboot, load the operating system and
begin operation.
Load Setup
Defaults
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then
display the message Load default configuration now? [Yes] [No]. When con-
firmed the setup utility will return to the Exit Menu. To return to another menu follow the direc-
tions in the Navigating Through the Setup Utility Section.
Discard
Changes
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The
message Load previous configuration now? [Yes] [No] will be displayed.
When confirmed the setup utility will return to the Exit menu. To return to another menu, follow
the directions in the Navigating Through the Setup Utility Section.
Phoenix SecureCore(tm) Tiano Setup
Item Specific Help
Info System Advanced Security Boot Exit
Exit System Setup and
save your changes to
NVRAM.
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
F1 Help
ESC Exit
Select Item
Select Menu
-/+ Change Values
Enter Select ► Sub-Menu
Shift + 1 Enable or disable(!)
F10 Save and Exit
/
/

Fujitsu LifeBook P772 Specifications

General

Brand	Fujitsu
Model	LifeBook P772
Category	Laptop
Language	English