FI‐7600/FI‐7700
C
ONSUMABLE
R
EPLACEMENTAND
C
LEANING
I
NSTRUCTIONS
CG00002‐296501
Consumables and Replacement Cycles
The following table shows the consumables used for the scanner.
Consumables need to be replaced
periodically. It is recommended that you
keep a stock of new consumables for
replacement before it reaches the end of its
life. The scanner records the number of
sheets scanned after replacing the
consumables, which allows you to check the
status of the consumables.
Note that the suggested replacement cycles
are references for using A4 (80 g/m
2
(20 lb)
wood-free or wood-containing paper, as
these cycles vary depending on the type of
documents scanned and how often the
scanner is used and cleaned.
HINT
Only use the specified consumables.
To purchase the consumables, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
To Next Page
Loading...
Need help?
General
