Fujitsu SCENICVIEW A17-3 User Manual

SCENICVIEW A17-3/A19-3
Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another computer.
If you are unable to solve the problem, please inform our help desk.
Having this problem? Check the following points:
No screen display
(power indicator does not light)
► Check that the monitor is switched on.
► Check whether the power cable on the monitor is
connected correctly.
► Check whether the computer is switched on.
No screen display
(power indicator lights)
► Check whether the computer is switched on.
► Check whether the data cable for the monitor is
correctly attached to the monitor port on the
computer.
► Press any key on the computer keyboard - the
computer may be in energy saving mode.
► Alter the brightness and/or contrast until you get a
picture.
Message:
No Signal
► Check whether the data cable for the monitor is
correctly attached to the monitor port on the
computer.
► Check whether the computer is switched on.
Message:
This is 85 Hz overdrive.
Change computer display input
to 1024 x 768 at 60 Hz.
Change computer display input
to 1280 x 1024 at 60 Hz.
The input signal (horizontal frequency and refresh rate)
at the displayed input does not correspond to the
technical monitor data.
► Adjust the video frequency range using the
computer software (see documentation for your
computer or your graphics card).
► Adjust a different screen resolution using the
computer software (see documentation for your
computer or your screen controller).
Picture position not correct The monitor recognises an undefined mode.
► Adjust the monitor automatically (using the AUTO
button - if provided - or using the OSD menu).
► Set the picture position with the OSD menu.
Picture is shaking ► Check whether the data cable for the monitor is
correctly attached to the monitor port on the
computer.
► Adjust the monitor automatically (using the AUTO
button - if provided - or using the OSD menu).
22 A26361-K1146-Z120-1-7619, edition 1

Fujitsu SCENICVIEW A17-3 Specifications

General

Brand	Fujitsu
Model	SCENICVIEW A17-3
Category	Monitor
Language	English