Furuno GP-1850F User Manual

9-1
9. PLOTTER ALARMS
9.1 Introduction
There are five plotter-related alarms which
generate both audible and visual alarms: Ar-
rival alarm, Anchor Watch alarm, XTE (Cross
Track Error) alarm, Proximity alarm, and
Speed alarm.
When an alarm setting is violated the buzzer
sounds, and the speaker icon (
) appears
in red. You may silence the alarm by press-
ing the [CLEAR] key. The icon remains on
the screen until the cause of the alarm is re-
moved or the alarm is deactivated.
9.2 Audio Alarm On/Off
The audio alarm sounds whenever an alarm
setting is violated. You can enable or disable
the audio alarm as follows:
1. Press the [ALARM] key to show the alarm
menu.
DGPS 3D
ALARM1
EDIT
CLEAR
ALARM
ALARM INFORMATION
AUDIO ALARM
ARRIVAL ALARM
ANCHOR ALARM
PROXIMITY ALARM
XTE ALARM
SPEED ALARM
ON
ON 0.100nm
ON 0.050nm
ON
ON 0.100nm
OVER/UNDER
12.5 ~ 15.0kt
NO ALARM
NEXT
PAGE
s
Figure 9-1 Alarm menu
2. Press ▲ or ▼ to select AUDIO ALARM.
3. Press the soft key EDIT to show the au-
dio alarm window.
AUDIO ALARM
▲
' ON
™ OFF
▼
Figure 9-2 Audio alarm window
4. Press ▲ or ▼ to select ON or OFF.
5. Press the soft key ENTER or the [ENTER]
key to register your selection.
9.3 Arrival Alarm
The arrival alarm informs you that your boat
is approaching a destination waypoint. The
area that defines an arrival zone is that of a
circle which you approach from the outside
of the circle. The alarm will be released if your
boat enters the circle. When the arrival alarm
is active a red dashed circle marks the ar-
rival alarm area.
: Alarm area
Own ship
Alarm
range
Destination
waypoint
Figure 9-3 How the arrival alarm works
1. Press the [ALARM] key to open the alarm
menu.
2. Press ▲ or ▼ to select ARRIVAL ALARM.
3. Press the soft key EDIT to show the ar-
rival alarm window.
ARRIVAL ALARM
▲
' ON 0.500nm
™ OFF
▼
Figure 9-4 Arrival alarm window
4. Press ▲ to select ON.
5. Operate the cursor pad to place the cur-
sor on the digit desired.
6. Key in the alarm range desired. The ar-
rival alarm range is 0.001 to 9.999 miles.
7. Press the soft key ENTER or the [ENTER]
key.

Furuno GP-1850F Specifications

General

Brand	Furuno
Model	GP-1850F
Category	Marine GPS System
Language	English