Furuno GP-32 User Manual

2. PLOTTER DISPLAY OVERVIEW
11
6. For AUTO or OFF, go to step 7. For
DISTANCE, enter the recording interval
as follows:
a) Press the [ENT] key.
b) Use ◄ or ► to choose digit to change.
c) Use ▲ or ▼ to change value.
d) Press the [ENT] key after setting the
recording interval.
7. Press the [MENU] key twice to finish.
2.6 Erasing Track
All track can be erased. Track cannot be
restored once erased, therefore be absolutely
sure you want to erase all track.
1. Press the [MENU] key once or twice to
display the menu.
2. Choose ERASE and then press the [ENT]
key to display the ERASE menu.
WAYPOINTS/MARKS?
ROUTES?
TRACK?
RESET TRIP? (6.40nm)
RESET ODO? (6.40nm)
GPS DATA?
MENU SETTINGS?
ALL BACKUP DATA?
ERASE
ERASE menu
3. Choose “TRACK?” and then press the
[ENT] key. The message shown below
appears.
ERASE TRACK.
ARE YOU SURE?
YES NO
Prompt for erasure of track
4. Press ◄ to choose YES and then press
the [ENT] key.
5. Press the [MENU] key twice to finish.

Furuno GP-32 Specifications

General

Brand	Furuno
Model	GP-32
Category	Marine GPS System
Language	English