Furuno GP-80 User Manual

6–1
6. SETTING UP
VARIOUS DISPLAYS
6.1 The Data Display
The user may select what data to display in
four locations on the data display.
SEP 12, 1995 23:59'59" U
DGPS 3D
12° 23.456' N
123° 23.456' E
POSITION
RNG
31.23
nm
SPD
12.3
kt
BRG
223.4°
CSE
123.4°
TO : 001
MARINE
POINT1
NEXT : 002
MARINE
POINT2
User-defined
display data #1
User-defined
display data #2
User-defined
display data #4
User-defined
display data #3
User-defined
display window
WGS84
Figure 6-1 Data display
The data the user may display are;
• Altitude (ALT)*
• Average course (AVR CSE)
• Average speed (AVR SPD)
• Course (CSE)
• Course error (dCSE)
• Cross track error (XTE)
• Depth (W.DPT)#
• ETA to waypoint (ETA)
• Range to waypoint (RNG)
• Route time-to-go (RT.TTG)
• Speed (SPD)
• Time-to-go to waypoint (TTG)
• Total route distance (RT.DIST)*
• Trip distance (TRIP)
• Trip elapsed time (TRIP TM)
• Water temperature (W.TMP)#, and
• Velocity to destination (VTD)*
• ETA to route
*ALT: Displayed only in 3D position fix-
ing.
*RT. DIST: Total distance from current
position to ultimate destination. Appears
when following a registered route or a
cursor-created route.
*VTD: When following a route, plus or
minus appears next to indication to denote
which direction the route is being traversed.
# Requires external sensor.
1) Press [MENU ESC] [9] and [1] to dis-
play the PLOTTER SETUP menu.
PLOTTER SETUP
Bearing Ref.
Auto
(07° W)
Man
(00° E)
ENT:Enter
MENU:Escape
Memory Apportion
Mag Variation
True
Trk = 1000 / 2000Pt
Mag
R.L
G.C
Calculation
User defined #1 SPD
User defined #2 CSE
User defined #3 RNG
User defined #4 BRG
Figure 6-2 PLOTTER SETUP menu
2) Press ▲ or ▼ to select one of four of "User
defined" (#1, #2, #3, #4).
3) Press t or s to select data to display.
4) Press the [NU/CU ENT] key. To select the
data to display at other user defined dis-
plays, repeat steps 2 and 3.
5) Press the [MENU ESC] key.

Furuno GP-80 Specifications

General

Brand	Furuno
Model	GP-80
Category	GPS
Language	English