1
1. HOW TO INSTALL THE
EQUIPMENT
1.1 Installation Considerations
Mount the unit with the lamps and keys face up on a horizontal surface. The unit can be mounted
on a desktop or bulkhead. Overhead mounting is not allowed. When selecting a mounting location,
observe the following to ensure optimal performance:
• Do not mount in an area where water can collect.
• Mount the unit in an area with a temperate between -15 and +55 °C (5 -131°F).
• Mount the unit in an area with low shock and vibration (near the center of gravity to the hull as
possible).
• Mount far away from any electromagnetic wave sources (radio antennas, etc.).
• Mount horizontally, and not on the ceiling.
• Mount as far away as possible from any magnetic interference and power cables.
• Mount at least 50cm (20”) away from the following:
• Engines, generators, steel fuel and water tanks
• Bilge pump, anchor, anchor chain
• Radio antenna cables
• Metal mast support and keel
• Mount in a location where it is easy to adjust or perform maintenance.
• Mount close to the ship’s draft (do not mount to the mast or Tuna tower).
To Next Page
Loading...
Need help?
General