Fusion 1000L User Manual

6 register this product online at www.acco.com
getting ready to laminate
Visual Ready Alert
3 The laminator will start to warm up. When the laminator is ready to use the green light next to the
‘tick
’ is illuminated.
NOTE: Your new laminator may emit
a slight odor during the initial
operation. Its is normal and will
diminish after a few hours of
operation.
NOTE: Only use 3 mil/5 mil photo pouches
Easy Set Up
1 Take the electrical plug and place in an appropriate power source, which is near the table you
intend to use.
2 To use the laminator move the slider to the right from the ‘
’ to the ‘3 mil’ position. Below the
slider you will see a white line, this indicates that you have switched the laminator on.
NOTE: Do not cut pouches prior to
lamination.
SEALED EDGE
Letter, Legal, Menu, etc. Irregular shaped item
SEALED EDGE
loading the pouch
1 Take your item to be laminated and place in to the appropriate sized laminating pouch,
ensuring it is rmly located along the sealed edge. This is to help ensure that you get optimal
quality output.
Before laminating important or unique documents, always run a test pouch through
the laminator using a similar type document.
English

Fusion 1000L Specifications

General

Brand	Fusion
Model	1000L
Category	Laminator
Language	English