cleaning
m
WARNING: UNPLUG THIS PRODUCT BEFORE CLEANING THE EXTERIOR.
WIPE EXTERIOR ONLY WITH A DAMP CLOTH AND DO NOT USE
DETERGENTS OR SOLVENTS.
Regularly feed a cleaning card or sheet of paper through the laminator to clean
the rollers.
laminating
2 Upon exiting remove your laminated item immediately and lay on a at surface to ensure best
quality.
3 When you are nished laminating push the slider switch back to the ‘
’ position and unplug.
NOTE: If pouch does not appear at back move slider to ‘ ’ position, unplug the power cord
and remove the pouch by pulling towards you from the front.
Feed a cleaning card or sheet of paper through the laminator to clean the rollers before
continuing.
1 On the front of the laminator there are line indicators to help you feed your pouch accurately.
Using the indicators feed the sealed edge of the pouch, into the laminator. The laminator will grip
the pouch and guide it through.
FUSION
™
1000L 9" & 12" LAMINATORS 7
English
To Next Page
Loading...
Need help?
General
