Getting Started
WARNING
See the Important Safety and Product Information guide in the product box for
product warnings and other important information.
The Apollo WB670 wired remote control is an optional accessory for compatible
FUSION
®
stereos.
To help you understand how the
Apollo WB670 remote control works, this
manual contains instructions for using the Apollo WB670 remote control with the
Apollo MS-RA670 stereo. The available features and functions of the Apollo
WB670 remote control may vary based on the stereo being controlled. For
specific information about your stereo, see the stereo owner's manual.
Getting the Owner's Manual
You can get the latest owner's manual and translations of manuals from the web.
1
Go to www.fusionentertainment.com/manuals/ms-wb670.
2
Select a manual.
Stereo Keys and Status LEDs
Because this device is designed to be installed in a location that may not be
easily accessible, almost all playback and device interaction is done through a
connected remote control or stereo. In some instances, you may need to
reference the LEDs or press the keys on the device itself.
Stereo Keys
Press to wake up the stereo
Hold together with the key for more than one second to reset the stereo to factory
settings
Press to make the stereo discoverable to BLUETOOTH
®
devices
Hold together with the key for more than one second to reset the stereo to factory
settings
Status LEDs
Icon LED color LED Indication
Green Solid: the stereo is receiving power
Green Blinking: the stereo is booting
Solid: the stereo is functioning normally
Green Blinking: the stereo is communicating over the FUSION PartyBus
™
network
Blue Blinking: the stereo is discoverable to BLUETOOTH devices
Solid: the stereo is connected to a
BLUETOOTH device
Controls
NOTE: These stereo controls are available when you use a connected remote
control, such as a
FUSION ERX400. If you control the stereo using a grouped
stereo or a different remote control, you should see the owner's manual for that
device for more information.
2 Quick Start Manual