12
ADDITIONAL MEDIA PLAYBACK
FUNCTIONS (USB/SD)
PLAY OPTIONS
MP3/WMA File or Folder Search
• Press the BAND button on front panel access the MP3/
WMA le search mode.
• Rotate the Encoder Volume Control to search through all
folders on the device then press ENTER to make your selection.
• Rotate the Encoder Volume control to select the desired
track within the previously selected folder and press ENTER
to start it playing
INTRO PLAY
• During playback, press the INT button (Preset button 2)
to start intro mode. The rst 10 seconds of all tracks on the
storage media will be played.
• Once you have nd a track you like, press INT again to
resume normal playback.
• To perform Intro Play on les in the current folder only,
press & hold the INT button while in Intro Mode. [INT) will
be displayed on the LCD along with the folder number.
When you nd your desired, press INT Twice to play the track
normally.
REPEAT PLAY
• During playback, press the RPT button (Preset button 3) to
repeat all tracks on the storage media. [RPT ALL] is displayed.
• If you press RPT again, the current track will be repeated
only [RPT TRK] will be displayed
• Pressing RPT again repeats all tracks in the current folder
only [RPT FLD] is displayed
• Once a track is playing in repeat mode, or to check if Repeat
is on, press the RPT button.
• To Cancel Repeat, press and hold the RPT button. The
display will revert back to the standard track number & time
elapsed display.
RANDOM PLAY
• During playback, press the RDM button (Preset button 4) to
display the current Random Play Mode. If Random Play is off,
[RDM OFF] will be displayed.
• Press RDM again to select Random Play for the current
folder only [RDM FLD] is displayed.
RE-CONNECTING THE BLUETOOTH DEVICE
Once paired, the phone should re-connect automatically
every time you use the system. If not, or you have
previously Disconnected the phone, you can manually re-
connect it using the following steps. 1. Press MENU
to enter the system menu.
Keep pressing until [CONNECT>] is displayed.
2. Press ENTER on the Encoder Volume Control.
[WAITING] will be displayed on the LCD display,
followed by [CONNECTED] when completed.
To Next Page
Loading...
Need help?
General
