57
Sources
Use this option to turn the AM or VHF tuner source on or off, if required. This
is useful if you only listen to FM and do not wish to step through AM and VHF
when selecting a tuner source.
To enable or disable the AM of VHF tuner sources:
1. Press the Menu key.
2. Turn and then press the Encoder to select the Settings > Sources.
3. If required, press the Encoder to enable the AM source ( ) or disable
the AM source ( ).
4. If required, turn the Encoder to select VHF then, press the Encoder to
enable the VHF source ( ) or disable the VHF source ( ).
5. Press any key to exit.
14
Brightness
To adjust the brightness of the display screen:
1. Press the Brightness key. The Brightness screen is displayed.
2. Turn the Rotary Encoder to adjust the brightness setting.
3. Press any key to exit
ADJUSTING SCREEN BRIGHTNESS
Note: LCD and button backlight brightness can be linked to the
ambient lighting level. For further details, see “Installing the 700
Series” on page 33.
To Next Page
Loading...
Need help?
General
