5
REMOVAL/RE-ATTACHMENT
OF THE FACE
PLEASE NOTE
• If any function does not work, open the front panel & re-close.
• Do not touch the contact pins on the rear of the face as this could
cause contact problems. If the contacts become dirty, please
clean with a soft cloth.
• Petrol and other solvents must not come in contact with the
front face
• Please use the supplied plastic case to store the front face when
it is removed from the unit.
• For security purposes, please ensure that when removed, the
face is stored out of sight if left in the vehicle.
1. Press the Panel OPEN button.
2. After flipping down the front panel, push it to the right (A), then
draw the left of the front panel outwards (B)
3. To re-attach the face, please complete the above steps in reverse.
To Next Page
Loading...
Need help?
General
