To attach the cable
to the handle:
4
5
v Attach the cable
4
to the handle with the clamps
5
.
Make sure that the cable is not locked between the handle
and the mower.
To assemble the grass box:
7
6
1. Connect both parts
6
of the grass box until the connections
audibly engage.
Make sure that all connections are engaged.
2. Put the cover
7
on the grass box.
Make sure that the cover aligns to the grass box.
3. Push the cover
7
on the grass box until the connections audibly
engage.
Make sure that all connections are engaged.
3. OPERATION
DANGER! Risk of injury!
Cut injury when the mower starts accidentally.
v Wait for the blade to stop, disconnect the mower from
the mains and use gloves before you adjust or transport
the mower.
To connect the mower:
8 9
0
DANGER! Risk of electric shock!
To avoid damage to the plug
8
the extension cable 9
must be inserted into the cable lock
0
.
v Before you operate insert the extension cable
9
into the
cable lock
0
.
1. Connect the extension cable
9
to the plug
8
.
2. Loop the extension cable
9
, insert the loop into the cable lock
0
and pull tight.
3. Connect the extension cable
9
into a 230 V mains socket.
15
EN
To Next Page
Loading...
Need help?
General
