Problem Possible Cause Remedy
Loud noises, the mower
is rattling
Screws on engine, its fixing or
on the mower housing are loose.
v Let the screws be tightened by
an authorised specialist dealer
or the GARDENA Service.
Mower runs unevenly or
vibrates strongly
Blade is damaged / worn or the
blade mounting is released.
v Let the blade be tightened
or replaced by an authorised
specialist dealer or the
GARDENA Service.
Blade is very dirty. v Clean the mower
(see 4. MAINTENANCE). If this
does not rectify the problem,
contact the GARDENA Service.
Lawn is not cleanly mowed Blade is blunt or damaged. v Let the blade be replaced by
the GARDENA Service.
Cutting height is too low. v Raise the cutting height.
NOTE: For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.
7. TECHNICAL DATA
Corded Lawnmower Unit Value (Art. 5037) Value (Art. 5042)
Rated power W 1600 1800
Mains voltage V (AC) 230 230
Mains frequency Hz 50 50
Speed of rotation cutting blade R/min 3200 3200
Cutting width cm 37 42
Cutting height adjustment
(5 positions)
mm 20 – 60 20 – 60
Volume of grass box l45 45
Weight kg 13.7 15.2
Sound pressure level L
pA
1)
Uncertainty k
pA
dB (A)
84.7
3
84.4
3
Sound power level L
WA
2)
:
measured/guaranteed
Uncertainty k
WA
dB (A)
94.6 / 96
1.79
93.6 / 96
2.55
Hand/arm vibration a
vhw
1)
Uncertainty k
a
m/s
2
2.99
1.5
< 2.5
1.5
Measuring process complying with:
1)
EN 60335-2-77
2)
RL 2000/14/EC
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of exposure.
The vibration emission value can vary during actual use of the electric power tool.
19
EN
To Next Page
Loading...
Need help?
General
