Remote View
The handheld device uses ANT+ technology to share dog locations with Garmin DriveTrack
™
devices and
compatible outdoor watches. The handheld device can transmit to multiple devices at the same time. You can
enable or disable sharing this data at any time by pressing the menu button and selecting Setup > Remote View
> Status.
NOTE: For more information about sharing dog locations with another device, refer to the owner's manual for
the device.
Device Information
Viewing E-label Regulatory and Compliance Information
The label for this device is provided electronically. The e-label may provide regulatory information, such as
identification numbers provided by the FCC or regional compliance markings, as well as applicable product and
licensing information.
1 Press the menu button.
2 From the Setup menu, select System.
3 Select About.
Product Updates
On your computer, install Garmin Express
™
(www.garmin.com/express).
This provides easy access to these services for Garmin
®
devices:
• Software updates
• Product registration
Setting Up Garmin Express
1 Connect the device to your computer using a USB cable.
2 Go to garmin.com/express.
3 Follow the on-screen instructions.
Device Care
NOTICE
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
Avoid chemical cleaners, solvents, sunscreen, and insect repellents that can damage plastic components and
finishes.
Secure the weather cap tightly to prevent damage to the USB port.
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Cleaning the Device
1 Wipe the device using a cloth dampened with a mild detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.
16 Device Information
To Next Page
Loading...
Need help?
General