• To select an intersection, select Intersections, and enter
the street names.
• To use coordinates, select Coordinates, and enter the
coordinates.
3
Select Use.
TIP: From the map, you can select another location, and
select Use to continue adding locations.
4
Select Add Next Location.
5
Repeat steps 2 through 4 until you have selected all locations
for the route.
6
Select View Map.
The device calculates your route, and a map of the route
appears.
TIP: You can select to view an elevation plot of the route.
7
Select Ride.
Following a Course From Garmin Connect
Before you can download a course from Garmin Connect, you
must have a Garmin Connect account (Garmin Connect,
page 7).
1
Select an option:
• Open the Garmin Connect Mobile app.
• Go to connect.garmin.com.
2
Create a new course, or select an existing course.
3
Select Send to Device.
4
Follow the on-screen instructions.
5
On the Edge device, select Courses > Saved Courses.
6
Select the course.
7
Select Ride.
Creating and Riding a Round-Trip Course
The device can create a round-trip course based on a specified
distance, starting location, and direction of navigation.
1
Select Courses > Round-Trip Course.
2
Select Distance, and enter the total distance for the course.
3
Select Start Location.
4
Select an option:
• To select your current location on the map, select Current
Location.
• To select a location on the map, select Use Map, and
select a location.
• To select a saved location, select Saved Locations, and
select a location.
• To browse for and select a point of interest, select Search
Tools > POI Categories, and select a nearby point of
interest.
• To select a city, select Search Tools > Cities, and select
a nearby city.
• To select an address, select Search Tools > Addresses,
and enter the address.
• To select an intersection, select Search Tools >
Intersections, and enter the street names.
• To use coordinates, select Search Tools > Coordinates,
and enter the coordinates.
5
Select Start Direction, and select a direction heading.
6
Select Search.
TIP: You can select to search again.
7
Select a course to view it on the map.
TIP: You can select and to view the other courses.
8
Select Ride.
Tips for Riding a Course
• Use turn guidance (Course Options, page 4).
• If you include a warmup, select to begin the course, and
warm up as normal.
• Stay away from your course path as you warm up.
When you are ready to begin, head toward your course.
When you are on any part of the course path, a message
appears.
• Scroll to the map to view the course map.
If you stray from the course, a message appears.
Viewing Course Details
1
Select Courses > Saved Courses.
2
Select a course.
3
Select an option:
• Select Summary to view details about the course.
• Select Map to view the course on the map.
• Select Elevation to view an elevation plot of the course.
• Select Laps to select a lap and view additional information
about each lap.
Displaying a Course on the Map
For each course saved to your device, you can customize how it
appears on the map. For example, you can set your commute
course to always display on the map in yellow. You can have an
alternate course display in green. This allows you to see the
courses while you are riding, but not follow or navigate a
particular course.
1
Select Courses > Saved Courses.
2
Select the course.
3
Select Settings.
4
Select Always Display to make the course appear on the
map.
5
Select Color, and select a color.
6
Select Course Points to include course points on the map.
The next time you ride near the course, it appears on the map.
Stopping a Course
1
Scroll to the map.
2
Select > .
Deleting a Course
1
Select Courses > Saved Courses.
2
Select a course.
3
Select > .
Course Options
Select Courses > Saved Courses > .
Turn Guidance: Enables or disables turn prompts.
Off Course Warnings: Alerts you if you stray from the course.
Search: Allows you to search for saved courses by name.
Filter: Allows you to filter by course type, such as Strava
™
courses.
Delete: Allows you to delete all or multiple saved courses from
the device.
Map Settings
Select > Ride Settings > Map.
Orientation: Sets how the map is shown on the page.
Auto Zoom: Automatically selects a zoom level for the map.
When Off is selected, you must zoom in or out manually.
Guide Text: Sets when the turn-by-turn navigation prompts are
shown (requires routable maps).
4 Navigation
To Next Page
Loading...
Need help?
General
Weight and Dimensions
