To move a waypoint on the Map Page:
1. On the Find Menu, highlight the Waypoints
icon, and press ENTER to open the Waypoints
Page.
2. Select the waypoint you want to move, and
press ENTER. The Waypoint Page opens.
3. Highlight the Map button, and press ENTER to
show the waypoint on the map.
4. Press ENTER again to place a MOVE marker
next to the waypoint.
5. Use the ROCKER to move the waypoint to a
new location on the map, and press ENTER.
Original
location
New location
Moving a waypoint
Averaging a Waypoint’s Location
You can average a new waypoint location over time to
produce a more accurate location.
NOTE: You must have a GPS Satellite x
before you can average a waypoint’s location.
When you average a waypoint after it has
been saved to the waypoints list and the Mark
Waypoint page is closed (even if you return to
that waypoint location), the unit appears to
be averaging the waypoint, but it is actually
averaging a new point at your current location.
Therefore, only average a waypoint when you
rst create it.
To use averaging to calculate a more
accurate location:
1. Before saving a new waypoint, press the
MENU key to open the Options list.
2. Highlight the Average Location option, and
press ENTER to open the Average Location
Page.
GPSMAP 60Cx Owner’s Manual 13
bAsIc oPerAtIon > AverAgIng A wAyPoInt’s locAtIon
To Next Page
Loading...
Need help?
General
Weight and Dimensions
